طلب

طلب

مــــــــــــــــــــــــــســــــــــــــــــــــ ــــــــــــاء الـــــــــــــــــــــــــمــــــــــــــــــــــ ـــــــــحــــــــــــــــــــــــبـــــــــــــــ ــــــــــــــــــــــةi
هلا وغلا

لو سمحتم اريد معلومات عن ram من خلال


1- استخدامات ram

2- ومميزات ram

تكون المعلومات بعربي أو انجليزي و لكن افضل انجليزي

---

'gf

الموضوع الأصلي: طلب || الكاتب: لؤلؤة الشرق || المصدر: منتديات نور الاستقامة

سبحان الله وبحمد...سبحان الله العظيم

شرح الرام - Ram - مكوناته - انواعه - مدعم بالصور

أول شي لازم تعرفون انو كلمة رام RAM هي اختصار للجملة:



Random Access Memory


ومعناها: ذاكرة الوصول العشوائي

مكونات ذاكرة الوصول العشوائي:



كل قطعة ذاكرة تعد دائرة متكاملة مركبة من ملايين الخلايا التي يكونها اتحاد الترانزستورات Transistors :

والمكثفات Capacitors :

بحيث يشكل كل ترانزيستور و مكثف خلية واحدة من خلايا الذاكرة، وكل خلية من هذه الخلايا تعادل بتاً واحداً من البيانات، ومعلوم أن البت bit أصغر وحدة من وحدات قياس الذاكرة وكل 8بت تشكل بايتاً واحداً والبايت Byte هو المساحة الكافية لتخزين قيمة حرف واحد أو رقم أو رمز (والمسافة أيضاً تعادل بايت).

سبب تسميتها بذاكرة الوصول العشوائي:

سميت بهذا الاسم لأنك تستطيع الوصول إلى أي خلية تريد بشكل مباشر ومن أي مكان، وهي على عكس ذاكرة الوصول التسلسلي Serial access memory :

واختصارها SAM والتي لا يمكنك الوصول لأي خلية فيها إلا بشكل تسلسلي كامل من البداية إلى النهاية.

أنواع ذاكرة الوصول العشوائي:

هناك أكثر من نوع من ذاكرة الوصول العشوائي، وأسعارها تتفاوت باختلاف هذه الأنواع:

النوع الأول SD-RAM أو SDR-RAM

هي اختصار للجملة Single Data Rate Random Access Memory والتي تعني ذاكرة الوصول العشوائي الديناميكية المتزامنة ذات النقل الأحادي . هذا النوع يقوم بنقل البيانات بسرعة مقبولة نوعاً ما، لكنه في المقابل يستهلك قدراً كبيراً من الطاقة مقارنة بالأنواع الأخرى لأنه يقوم بنقل بت مرة واحدة عند ارتفاع النبضة ثم يعود ليرفع بتاً آخراً بارتفاع النبضة .. وهكذا، وكلما زادت الوحدات أدى ذلك إلى زيادة سرعة المعالجة . وسرعة نقل البيانات فيها إما أن تكون 100 أو 133 ميجاهرتز.

النوع الثاني :

أ- DD-RAM أو DD-SDRAM :

هناك خلاف على تسميتها ، فالبعض يقول أنها اختصار للجملة Dual Data Rate Synchronous Dynamic Random Access أي ذاكرة الوصول العشوائي الديناميكية المتزامنة ذات النقل الثنائي ، بينما هناك من يقول أنها تعني Double Data Rate-Synchronous DRAM أي ذاكرة الوصول العشوائي الديناميكية المتزامنة ذات النقل المضاعف أو المزدوج، وكلاهما يؤدي لنفس المعنى، هذا النوع يؤدي ضعف أداء النوع الأول، فهي تعطي 2 بت في الثانية الواحدة بمعنى أنها تنقل بتاً لدى ارتفاع النبضة وآخراً عند انخفاضها . ويتميز هذا النوع عن سابقه بان لديه عرض نطاق مضاعف وهذا يمكنه من نقل كمية مضاعفة من المعلومات في الثانية قياسا لل sd-ram . كماأنه يستخدم قدراً أقل من الطاقة. .

ب- DD-RAM II SDRAM أو إختصارا DDR 2 :

هي تطوير على DD-RAM يزيد مرة اخرى من عرض النطاق كما انه يستخدم قدرا اقل من الطاقة قياسا لل DDR ، ويتوقع ان يصبح الاوسع استخداما في عام 2005.

النوع الثالث RD-RAM :

هي اختصار للجملة Rambus Dynamic Random Access Memory وتعني الخطوط الديناميكية لذاكرة الوصول العشوائي، وهذه الذاكرة تمتاز بسرعة مذهلة وأسعارها باهضة، ويرتكز عملها على أساس توزيع نقل البيانات ما بين الذاكرة والمعالج على أكثر من قناة. عن طريق تصغير حجم الناقل الأمامي من 32 بت (المستخدمة في الأنواع الأخرى) إلى 16بت ومن ثم توزيع الحركة على أكثر من قناة تعمل بشكل خطوط متوازية (وهذا سبب تسميتها بالخطوط) ، وتعطي سرعات تردد عالية جداًَ تصل إلى 800 ميجاهرتز. وهذا النوع لا يعمل إلا مع معالجات بنتيوم 4 كما أنها تتطلب أنواعاً مخصصة من اللوحات الأم مثلإنتل 850. وتم التخلي عنها بسرعة بسبب إثبات ذاكرة DDR والجيل الجديد DDR 2 انهما يمكنهما إعطاء نتائج منافسة جدا وحتى متفوقة بتكلفة إقل .

والسلام عليكم ورحمة الله وبركاته

Random-access memory



"RAM" redirects here. For other uses of the word, see Ram (disambiguation).

Example of writable volatile random-access memory: Synchronous Dynamic RAM modules, primarily used as main memory in personal computers, workstations, and servers.


Computer memory types Volatile

• RAM
  • DRAM (e.g., DDR SDRAM)
  • SRAM
• In development
  • T-RAM
  • Z-RAM
  • TTRAM
• Historical
  • Delay line memory
  • Selectron tube
  • Williams tube

Non-volatile

• ROM
  • Mask ROM
  • PROM
  • EPROM
  • EEPROM
• Flash memory
• Early stage
  • FeRAM
  • MRAM
  • PRAM
• In development
  • CBRAM
  • SONOS
  • RRAM
  • Racetrack memory
  • NRAM
  • Millipede memory
• Historical
  • Drum memory
  • Magnetic-core memory
  • Plated wire memory
  • Bubble memory
  • Twistor memory

Random access memory (RAM) is a form of computer data storage. Today, it takes the form of integrated circuits that allow stored data to be accessed in any order with a worst case performance of constant time. Strictly speaking, modern types of DRAM are therefore not random access, as data is read in bursts, although the name DRAM / RAM has stuck. However, many types of SRAM, ROM, OTP, and NOR flash are still random access even in a strict sense. RAM is often associated with volatile types of memory (such as DRAM memory modules), where its stored information is lost if the power is removed. Many other types of non-volatile memory are RAM as well, including most types of ROM and a type of flash memory called NOR-Flash. The first RAM modules to come into the market were created in 1951 and were sold until the late 1960s and early 1970s.
Other memory devices (magnetic tapes, disks) can access the storage data only in a predetermined order, because of mechanical design limitations




.


History


1 Megabit chip - one of the last models developed by VEB Carl Zeiss Jena in 1989


An early type of widespread writable random-access memory was magnetic core memory, developed from 1955 to 1975, and subsequently used in most computers up until the development and adoption of the static and dynamic integrated RAM circuits in the late 1960s and early 1970s. Before this, computers used relays, delay line/delay memory, or various kinds of vacuum tube arrangements to implement "main" memory functions (i.e., hundreds or thousands of bits), some of which were random access, some not. Drum memory could be expanded at low cost but retrieval of non-sequential memory items required knowledge of the physical layout of the drum to optimize speed. Latches built out of vacuum tube triodes, and later, out of discrete transistors, were used for smaller and faster memories such as random-access register banks and registers. Prior to the development of integrated ROM circuits, permanent (or read-only) random-access memory was often constructed using semiconductor diode matrices driven by address decoders, or specially wound core memory planes.
[edit] Types of RAM


Top L-R, DDR2 with heat-spreader, DDR2 without heat-spreader, Laptop DDR2, DDR, Laptop DDR


The two main forms of modern RAM are static RAM (SRAM) and dynamic RAM (DRAM). In static RAM, a bit of data is stored using the state of a flip-flop. This form of RAM is more expensive to produce, but is generally faster and requires less power than DRAM and, in modern computers, is often used as cache memory for the CPU. DRAM stores a bit of data using a transistor and capacitor pair, which together comprise a memory cell. The capacitor holds a high or low charge (1 or 0, respectively), and the transistor acts as a switch that lets the control circuitry on the chip read the capacitor's state of charge or change it. As this form of memory is less expensive to produce than static RAM, it is the predominant form of computer memory used in modern computers.
Both static and dynamic RAM are considered volatile, as their state is lost or reset when power is removed from the system. By contrast, Read-only memory (ROM) stores data by permanently enabling or disabling selected transistors, such that the memory cannot be altered. Writeable variants of ROM (such as EEPROM and flash memory) share properties of both ROM and RAM, enabling data to persist without power and to be updated without requiring special equipment. These persistent forms of semiconductor ROM include USB flash drives, memory cards for cameras and portable devices, etc. As of 2007, NAND flash has begun to replace older forms of persistent storage, such as magnetic disks and tapes, while NOR flash is being used in place of ROM in netbooks and rugged computers, since it is capable of true random access, allowing direct code execution.
ECC memory (which can be either SRAM or DRAM) includes special circuitry to detect and/or correct random faults (memory errors) in the stored data, using parity bits or error correction code.
In general, the term RAM refers solely to solid-state memory devices (either DRAM or SRAM), and more specifically the main memory in most computers. In optical storage, the term DVD-RAM is somewhat of a misnomer since, like CD-RW, a rewriteable DVD must be erased before it can be rewritten.
[edit] Memory hierarchy

One can read and over-write data in RAM. Many computer systems have a memory hierarchy consisting of CPU registers, on-die SRAM caches, external caches, DRAM, paging systems, and virtual memory or swap space on a hard drive. This entire pool of memory may be referred to as "RAM" by many developers, even though the various subsystems can have very different access times, violating the original concept behind the random access term in RAM. Even within a hierarchy level such as DRAM, the specific row, column, bank, rank, channel, or interleave organization of the components make the access time variable, although not to the extent that rotating storage media or a tape is variable. The overall goal of using a memory hierarchy is to obtain the higher possible average access performance while minimizing the total cost of the entire memory system (generally, the memory hierarchy follows the access time with the fast CPU registers at the top and the slow hard drive at the bottom).
In many modern personal computers, the RAM comes in an easily upgraded form of modules called memory modules or DRAM modules about the size of a few sticks of chewing gum. These can quickly be replaced should they become damaged or when changing needs demand more storage capacity. As suggested above, smaller amounts of RAM (mostly SRAM) are also integrated in the CPU and other ICs on the motherboard, as well as in hard-drives, CD-ROMs, and several other parts of the computer system.
[edit] Other uses of RAM

In addition to serving as temporary storage and working space for the operating system and its applications, RAM is used in numerous other ways.
[edit] Virtual memory

Main article: virtual memory
Most modern operating systems employ a method of extending RAM capacity, known as "virtual memory". A portion of the computer's hard drive is set aside for a paging file or a scratch partition, and the combination of physical RAM and the paging file form the system's total memory. (For example, if a computer has 2 GB of RAM and a 1 GB page file, the operating system has 3 GB total memory available to it.) When the system runs low on physical memory, it can "swap" portions of RAM to the paging file to make room for new data, as well as to read previously swapped information back into RAM. Excessive use of this mechanism results in thrashing and generally hampers overall system performance, mainly because hard drives are far slower than RAM.
[edit] RAM disk

Main article: RAM disk
Software can "partition" a portion of a computer's RAM, allowing it to act as a much faster hard drive that is called a RAM disk. A RAM disk loses the stored data when the computer is shut down, unless memory is arranged to have a standby battery source.
[edit] Shadow RAM

Sometimes, the contents of a relatively slow ROM chip are copied to read/write memory to allow for shorter access times. The ROM chip is then disabled while the initialized memory locations are switched in on the same block of addresses (often write-protected). This process, sometimes called shadowing, is fairly common in both computers and embedded systems.
As a common example, the BIOS in typical personal computers often has an option called “use shadow BIOS” or similar. When enabled, functions relying on data from the BIOS’s ROM will instead use DRAM locations (most can also toggle shadowing of video card ROM or other ROM sections). Depending on the system, this may not result in increased performance, and may cause incompatibilities. For example, some hardware may be inaccessible to the operating system if shadow RAM is used. On some systems the benefit may be hypothetical because the BIOS is not used after booting in favor of direct hardware access. Free memory is reduced by the size of the shadowed ROMs.[1]
[edit] Recent developments

Several new types of non-volatile RAM, which will preserve data while powered down, are under development. The technologies used include carbon nanotubes and approaches utilizing the magnetic tunnel effect. Amongst the 1st generation MRAM, a 128 KiB (128 × 210 bytes) magnetic RAM (MRAM) chip was manufactured with 0.18 µm technology in the summer of 2003. In June 2004, Infineon Technologies unveiled a 16 MiB (16 × 220 bytes) prototype again based on 0.18 µm technology. There are two 2nd generation techniques currently in development: Thermal Assisted Switching (TAS)[2] which is being developed by Crocus Technology, and Spin Torque Transfer (STT) on which Crocus, Hynix, IBM, and several other companies are working.[3] Nantero built a functioning carbon nanotube memory prototype 10 GiB (10 × 230 bytes) array in 2004. Whether some of these technologies will be able to eventually take a significant market share from either DRAM, SRAM, or flash-memory technology, however, remains to be seen.
Since 2006, "Solid-state drives" (based on flash memory) with capacities exceeding 256 gigabytes and performance far exceeding traditional disks have become available. This development has started to blur the definition between traditional random access memory and "disks", dramatically reducing the difference in performance.
Some kinds of random-access memory, such as "EcoRAM", are specifically designed for server farms, where low power consumption is more important than speed.[4]
[edit] Memory wall

The "memory wall" is the growing disparity of speed between CPU and memory outside the CPU chip. An important reason for this disparity is the limited communication bandwidth beyond chip boundaries. From 1986 to 2000, CPU speed improved at an annual rate of 55% while memory speed only improved at 10%. Given these trends, it was expected that memory latency would become an overwhelming bottleneck in computer performance.[5]
Currently, CPU speed improvements have slowed significantly partly due to major physical barriers and partly because current CPU designs have already hit the memory wall in some sense. Intel summarized these causes in their Platform 2015 documentation (PDF)

“First of all, as chip geometries shrink and clock frequencies rise, the transistor leakage current increases, leading to excess power consumption and heat... Secondly, the advantages of higher clock speeds are in part negated by memory latency, since memory access times have not been able to keep pace with increasing clock frequencies. Third, for certain applications, traditional serial architectures are becoming less efficient as processors get faster (due to the so-called Von Neumann bottleneck), further undercutting any gains that frequency increases might otherwise buy. In addition, partly due to limitations in the means of producing inductance within solid state devices, resistance-capacitance (RC) delays in signal transmission are growing as feature sizes shrink, imposing an additional bottleneck that frequency increases don't address.”

The RC delays in signal transmission were also noted in Clock Rate versus IPC: The End of the Road for Conventional Microarchitectures which projects a maximum of 12.5% average annual CPU performance improvement between 2000 and 2014. The data on Intel Processors clearly shows a slowdown in performance improvements in recent processors. However, Intel's Core 2 Duo processors (codenamed Conroe) showed a significant improvement over previous Pentium 4 processors; due to a more efficient architecture, performance increased while clock rate actually decreased.]

مشكور اخي


بارك الله فيك